|
|
 |
| 塑料工业 | | China Plastics Industry | | 主办： 中蓝晨光化工研究院 | | 周期： 月刊 | | 出版地：四川省成都市 | | 语种： 中文 | | 开本： 大16开 |
ISSN 1005-5770 | | CN 51-1270/TQ | | 邮发代号 62-71 | | 创刊年：1970 | | | 中国期刊网来源刊 | | 2004版核心期刊 | |
|
 |
 |
同类杂志推荐 |
|
 |
|
 |
|
 |
| 2005年05期 |
| 目 录 |
 | 聚合物共混物相容性评价的研究进展
Progress in Research of Compatibility Evaluation of Polymer Blend | | 刘灿强,张公正,张莹莹 | | 导电聚苯胺的合成及电磁学性能、吸波性能研究
Studies of Synthesis,Electromagnetic Propertiy and Microwave Absorptivity of Polyaniline (PANI) by Different Methods | | 陈骁,熊忠,陶雪钰,方醌,吴其晔 | | 无机纳米粒子填充改性聚四氟乙烯复合材料的研究
Study on PTFE Composite Modified by Inorganic Nano-meter Material | | 朱友良,裴建云 | | 共混体系HDPE/m-LLDPE在动态保压注射成型中增强增韧的研究
Study of Reinforcing and Toughening of HDPE/m-LLDPE Blends by Oscillating Packing Injection Molding | | 李代叙,周海英,申开智,王静 | | 晶须硅在PA6改性中的应用研究
Research on Application of Silicon Whisker to Modification of PA6 | | 刘涛 | | 折光板注射成型缺陷的CAE研究
CAE Analysis of Defect of Injection Molding of Refracting Plate | | 李东成,于思荣,李东平,李明哲,苗强 | | 气辅注射工艺参数对气体穿透能力的影响
Effect of Gas-assisted Injection Processing Parameters on Gas Penetrating Power | | 李光明,傅建,李军,张永辉 | | 夹芯注塑成型过程的计算机可视化模拟分析——材料粘度与工艺参数对芯层分布及均匀性的影响
Visual Computer-based Simulation of Sandwich Injection Molding Process:Influence of Melt Viscosity and Process Parameter on Distribution and Uniformity of Core Melt | | 钱欣,周珏 | | 带中子机构的冰箱门体堵盖的注射模具设计
Design of Injection Mould for Doorknob of Refrigerator with Neutron | | 尚波 | | 聚乙烯醇(PVA)复合膜及其与印刷用炭粉的界面特性研究
Study of PVA Multilayer Membrane and Its Interfacial Characteristics with Charcoal Powder for Printing | | 纪建超,王露丝 | | 淀粉粒径对微细化淀粉/LDPE共混体系降解性能影响
Effect of Starch Particle Diameter on Degradability of Micronized Starch/LDPE Blend | | 吴俊,谢守和,谢笔钧 | | 原位反应法聚丙烯/蒙脱土复合材料的制备、结构与性能 Ⅱ.热分析与流变行为
Preparation,Structure and Property of PP/Montmorillonite Composite Prepared by In-situ Reactive Method Ⅱ:Thermal Analysis and Rheological Behavior | | 刘芳,吴小华,林晓丹,贾德民 | | 尼龙1212/SEBS-g-MA/DIDP/BSBA共混体系热行为的研究
Study on Thermal Behavior of Nylon 1212/SEBS-g-MA/DIDP/BSBA Blend | | 王玉东,赵清香,刘民英,董静,申小清 | | 热塑性淀粉/纤维共混物性能的研究
Study of Property of Thermoplastic Starch/Cellulose Fiber | | 冀玲芳,李树材,李梅 | | 多单体固相接枝共聚物对废聚丙烯/稻糠复合体系结构与性能的影响
Effect of Multi-monomer Solid-phase Graft Copolymer on Structure and Property of Recycled PP/ Rice Chaff Composites | | 徐焕翔,何慧,洪浩群,贾德民 | | 稀土稳定剂及有机酸对无毒低发泡UPVC发泡体系的影响
Influence of Rare-earth Stabilizer and Organic Acid on Foaming System for Non-toxic Low-foamed UPVC | | 钟荣栋 | | LDPE/EVA鞋底发泡材料的研究
Study of LDPE/EVA Foamed Sole Materials | | 连荣炳,张卫勤,叶盛京 | | PET/纳米累托土复合材料的研制与应用
Development and Application of PET/Nano-meter NCL Composite | | 行春丽,成战胜,杨林 | | 鞋材用聚丙烯酸酯乳液及其醇溶性港宝的研制
Prepartion of Acrylate Emulsion and Alcohol-soluble Hard Pad for Shoes Material | | 农兰平,唐国成 | | 炭黑在高分子聚合物中的导电性研究
Research of Carbon Blacks Conductivity in High Polymers | | 吕海金 | | 国外动态 | | | | 塑料市场 | | | | 中国塑料专利 | | | | 简讯 | | |
 |
往期检索 |
 |
共247期 |
|